HobbyWing XROTOR Micro 4in1 40A ESC with DShot600 | 4088 | Full Size 30mm x 30mm | 30901076

XRotor
ESC-2418-4088 Out Of Stock

To order by telephone, please call +1 866.990.0911

$59.99

Out Of Stock

No reviews have been submitted for this product



High-quality Components
 
The 4-in-1 ESC not only includes 4 high-performance 40A ESCs, 1 built-in BEC,
but also an Amp/Volt monitoring port which allows FC to monitor the volt & amp
in real time (on condition that the FC supports this function); it s as small as a
FC for FPV(s) and easy for installation and wiring. With the remarkably small
size, it's a perfect match for competition FPV(s)
 
 
 
High-quality Components
 
The use of EMF8BB21F16G MCUs with the operating frequency of up to
48MHz, imported high quality MOSFETs, 3-in-1 drive ICs and ceramic
capacitors, 3-ounce copper, and 6 layers of PCBs guarantees less heat,
higher efficiency and rapider response.
 
 
BLHeli-S Firmware Ready
 
The ESC (with great performance and rich functions)
uses the original BLHeli-S firmware and supports adjusting
parameters or upgrading firmware via different methods
(i.e. via throttle signal wire with using other development
board or a FC flashed with the cleanfight/betaflight firmware).
 
 
 
DShot150/300/600 Ready
 
Besides the regular PWM mode,
Oneshot125/Oneshot42/Multishot modes, the latest
DShot150/300/600 modes are also supported. In
DShot150/300/600 modes, the ESC has great
anti-interference performance and rapid response.
 
 
Hardware Generated PWM &
Damped Light Mode
 
The ESC firmware uses hardware generated motor pwm for smooth
throttle response and silent operation. Damped light does regenerative
breaking, causing very fast motor retardation, and it inherently also
does active freewheeling.
 
 

 

 

 

 

Specifications

Product Name

 

XRotor Micro 40A 4in1 BLHeli-S DShot600

Product Number

 

30901076

Specifications

Cont./Peak Current

40Ax4/50Ax4

 Input Voltage

2-5S Lipo

BEC output

5V & 1.5A

Wires & Connectors

Input Wires

Red-14AWG-130mm / Black-14AWG-130mm

Output Wires

No wires but solder tabs

Input Connectors

XT60 (w/ Wires Soldered on)

Output Connectors

No

(Note: All the wire length above is the original length not the length you see from the outside.)

Features

Firmware

BLHeli-S A-H-50 16.5

ESC Programming

Stick Programming, BLHeliSuite

Stick Programming

Supported

DEO

Supported

Throttle Range Calibration

Supported

Oneshot125 Mode

Supported

Oneshot42 Mode

Supported

MultiShot Mode

Supported

DShot150/300/600

Supported

Timing

Supported

Motor Rotation

Supported

Size & Weight

Size

42.6x36x4mm

Weight

10g

Applications

 

180-280mm FPVs

 


There aren't any reviews for this product.


Related Products


Categories

Back to top